glims aнглийская версия
Интернет-магазин представительского класса
Catalogue
Tile adhesive
Plasters
Flooring compounds
Primers
Repair mortars
Waterproofing materials
About company
Contacts
+7 (499) 115-07-93
Request a call
Ask a Question
Войти
  • Корзина0
  • Отложенные0
info@glims.tetris-studio.ru
г. Москва, ул. Пушкина 19
  • Instagram
glims aнглийская версия
RU
/
EN
+7 (499) 115-07-93
Request a call
Catalogue
  • Tile adhesive
    Tile adhesive
  • Plasters
    Plasters
  • Flooring compounds
    Flooring compounds
  • Primers
    Primers
  • Repair mortars
    Repair mortars
  • Waterproofing materials
    Waterproofing materials
About company
  • Contacts
+  ЕЩЕ
    glims aнглийская версия
    Catalogue
    • Tile adhesive
      Tile adhesive
    • Plasters
      Plasters
    • Flooring compounds
      Flooring compounds
    • Primers
      Primers
    • Repair mortars
      Repair mortars
    • Waterproofing materials
      Waterproofing materials
    About company
    • Contacts
    +  ЕЩЕ
      Отложенные 0 Корзина 0
      glims aнглийская версия
      Отложенные 0 Корзина 0
      Phones
      +7 (499) 115-07-93
      Заказать звонок
      • Catalogue
        • Back
        • Catalogue
        • Tile adhesive
        • Plasters
        • Flooring compounds
        • Primers
        • Repair mortars
        • Waterproofing materials
      • About company
        • Back
        • About company
        • Contacts
      • Личный кабинет
      • Корзина0
      • Отложенные0
      • +7 (499) 115-07-93
      Contact Information
      г. Москва, ул. Пушкина 19
      info@glims.tetris-studio.ru
      • Instagram

      GLIMS®WhiteFix adhesive mixture on the base of white cement

      Home
      —
      Tile adhesive
      PlastersFlooring compoundsPrimersRepair mortarsWaterproofing materials
      —GLIMS®WhiteFix adhesive mixture on the base of white cement
      Recommend
      GLIMS®WhiteFix adhesive mixture on the base of white cement
      210 rub./pcs.
      Price Options
      210 rub./pcs.
      Details
      Out of stock
      Описание

      Adhesive for mounting of ceramic and glass mosaics, natural and artificial stone. For exterior and interior use. For pools, laundries, terraces, shower rooms and sanitary rooms.

      ADVANTAGES
      • Allows to lay tiles "from top downward"
      • Laying “tile-on- tile ”
      • It is used in the "heat-insulated floor" system
      • Water-resistant, thermoresistant, frost-resistant
      • cost-efficient
      • Does not require special adhesive ground coat
      • The material is environmentally friendly, does not contain asbestos fibres
      • Complies with European standards EN 12004 Class С2Т
      • Does not require the plasticizers addition
      SURFACE PREPARATION

      It is applied on concrete, brick, gypsum and cement plasters, gypsum boards, moisture-resistant gypsum boards, gypsum plasterboards, asbestos-cement boards as well as on surfaces already covered with old tiles. The lower stratum surface must be dry, durable, free from dust, dirt, paint and grease stains. At material application and solidification the temperature of the lower stratum and the environment must not be not less than +5°C. Treat the cleared surface a primer of GLIMS® PrimeГрунт by means of a brush or a roller. If the gypsum plaster or highly absorbing substrate is used as a lower stratum, it is recommended to treat the surface with primer twice and wait for complete drying out. Vertical surfaces with irregularities starting from 5 mm are recommended to be preliminarily (at least 24 hours earlier) leveled using the leveling stopping fillers GLIMS® StyroПрайм, GLIMS®Stukko-RF or GLIMS®Tweed plaster (minimum layer thickness is 10 mm). Horizontal surfaces with irregularities of 5 mm or more are recommended to be preliminarily (at least 24 hours in earlier) leveled with poured floors GLIMS®S-Base or GLIMS®S-Level or with poured floors on cement binder GLIMS®CF-40 or GLIMS®CF-10. When laying on the surface of heated floors, the under floor heating system must be turned off 24; the lower stratum temperature must be from +5 to +30 °C.

      MORTAR PREPARATION

      Pour the dry mix into a reservoir with clean water at a rate of 0.24-0,26 l of water per 1 kg of dry mix (6-6,5 l per bag of 25 kg) and mix thoroughly with a mixer machine to even consistency. Keep the mortar for 10 minutes and mix it once more. The mortar is in working order for 4 hours after mixing. If during this time the mortar thickens in the reservoir, it is necessary to “revive” it by mixing without adding of water.

      TECHNOLOGY OF WORK EXECUTION

      If it is necessary to create a waterproofing layer, before applying the adhesive, preliminarily but no less than 24 hours earlier treat the lower stratum with GLIMS® GreenResin or GLIMS® ВодоStop water isolation materials. The contact adhesive layer is applied by the smooth side of the putty spattle and leveled with a notched trowel. The tile is put to place and gently pressed into the adhesive. Determine the adhesive application area basing on the possibility of tiles laying on it during 20 minutes. It is not necessary to wet the tile with water before laying. Joints grouting. Joints grouting should be performed no earlier than after 24 hours. For tile joints grouting it is recommended to use GLIMS® Fuga waterproof grout. The material is environmentally friendly in use and operation. Operation temperature range is from­ -50 to +70 ° С. While working it is necessary to observe the norms of SNiP and industrial hygiene.

      CONSUMPTION

      1.3 kg of dry mix per 1 m2 with a layer thickness of 1 mm.

      PACKAGING

      kraft paper bags 25 kg, plastic bags 5 kg.

      TRANSPORTATION AND STORAGE

      During transportation and storage, bags with dry mortar should be protected from damage and soaking. The storage period is 12 months. Dry cement adhesive mortar mix М100, Pk2, D1100, GOST 56387­-2015 Radiation safety class - 1. • Complies with European standards (EN 12004 Class C2). TU 5745-010-40397319-2003 № 0400/2

      210 rub./pcs.
      Price Options
      210 rub./pcs.
      Details
      Out of stock
      Do you need a consultation?

      Our specialists will answer any question you are interested in!
      Ask a question
      Catalogue
      About company
      Contacts
      +7 (499) 115-07-93
      info@glims.tetris-studio.ru
      г. Москва, ул. Пушкина 19
      • Instagram
      2025 © Аспро: Максимум - интернет-магазин