It adjusts the absorption capacity of the lower stratum, strengthens the surface, increases adhesion, prevents the appearance and development of fungus, reduces the consumption of paint and wall-paper paste. Increases adhesion between brick, concrete, foam concrete, plastered, filled, gypsum plasterboard or asbestos-cement lower stratum surfaces and applied layers of plaster, stopping filler, adhesive or paint
- Does not create a film
- Serves as an excellent dust binding agent
- Reduces the absorption capacity of the lower stratum, prevents the appearance and development of fungus
- Provides uniform coloring of the lower stratum, reduces the consumption of paint or wall-paper paste
- Increases the lower stratums water resistance
PREPARATION
The lower stratum surface must be dry, durable, free from dust, dirt, paint and grease stains. At material application and solidification the temperature of the lower stratum and the environment must not be lower than +5°C. The material is environmentally friendly in use and operation. Operation temperature range is from -50 to +70 ° С. While working it is necessary to observe the norms of SNiP and industrial hygiene. The material is ready for use and does not require the addition of solvents or water.
TECHNOLOGY OF WORK EXECUTION
Without dilution apply with a brush, roller or spray diffuser over the entire surface of the lower stratum. A surface with increased water absorption must be treated with ground coat twice. Perform subsequent operations on treated with ground coat lower stratum surface for grouting with GLIMS®S-Base and GLIMS®S-Level poured floors only after its complete drying out (about 3 hours). When treating of horizontal surfaces prevent the formation of puddles of unabsorbed primer. After treating of brick, concrete and autoclaved aerated concrete lower stratums it is allowed not to wait for the lower stratums drying out, but almost immediately start applying mortars of GLIMS®VeluR, GLIMS®Tweed cement plasters; GLIMS®Plast-R, GLIMS®Stukko-RF, GLIMS®SATIN and GLIMS®TS70 levelling stopping fillers, GLIMS® Finish R/Finish F/Finish - Gloss/Finish-LightRoom + finish stopping fillers or GLIMS tile adhesives.
CONSUMPTION:
from 0.08-0.2 kg per 1 m2 depending on the absorption capacity of the treated surface.
PACKAGING:
plastic cans of 5 l and plastic pails of10 l.
TRANSPORTATION AND STORAGE
Transport under conditions ensuring the integrity of the packaging. Store at a temperature from +5 to + 30 °, protect from frost and direct exposure to sunlight. The storage period is 12 months.
TU 5775-007-40397319-2004 № Г-7011
