Rapid elimination of "alive" leaks in underground floors, tunnels, wells, tanks, desilt basin. For exterior and interior use
- Makes it possible to work underwater
- The mortar solidification rate is 1.5–5 minutes
- Makes it possible to eliminate open leaks quickly and effectively
- High adhesion to various bases: concrete, brick, natural and artificial stone, metal
- Convenient and easy to use
SURFACE PREPARATION
It is applied on concrete, stone. The edges of the hole should be cleaned by removing sludge, dirt, and other loose layers from them. If the water pressure is large, it is necessary to drive in a fabric, wooden or other plug into the hole, deepening it by 1-2 cm. At material application and solidification the temperature of the lower stratum and the environment must not be lower than +5°C. Operation temperature range is from -50 to +70 ° С. While working it is necessary to observe the norms of SNiP and industrial hygiene.
TECHNOLOGY OF WORK EXECUTION
Manually form a seal in accordance with the shape of the hole and paste it up. Press the seal by hand and hold for 1-2 minutes. Seal long cracks sequentially from top to bottom using a small amount of material. Attention! It is necessary to work in rubber gloves, as the cement mortar dries the skin and can cause irritation! After eliminating the leak, it is necessary to carry out the waterproofing works cycle with GLIMS® ВодоStop or GLIMS® GreenResin cement sealant.
CONSUMPTION
from 1,6 g/cm3.
PACKAGING
pail of 0,8 kg (net).
TRANSPORTATION AND STORAGE
Transport under conditions ensuring the integrity of the packaging. Store at a temperature from +5 to + 30 °, protect from frost and direct exposure to sunlight. The storage period is 12 months. ТУ5745-010-40397319-2003№0430/3
